LiuGong CLG4165
Engine   DCEC 6BTAA5.9-C180
Rated Power  (kW) 125(170)@2200
Blade Width  mm(inches) 3960(156)
Maximum Speed  km/h (mph) 38 (23.6)
Draw Bar Pull (kN) 81.6
Operating Weight  kg(Lb) 15000
ENGINE
Tier   II
Make   Dongfeng Cummins
Gross Power kW(Hp)@rpm 125(170)@2200
Net Power kW(Hp)@rpm 113(151)@2200
Peak Torque   750N.m/1300rpm
Torque Rise %   30%
Number of Cylinders   6
Aspiration   turbo air-to-air aftercooled
TRANSMISSION
Transmission Type   power shift
Transmission Configuration   6f/3r
Torque Converter   three-member single turbine
Maximum Travel Speed, fwd (km/h) 38
Maximum Travel Speed, rev (km/h) 24.7
Number of Speeds, fwd   6
Number of Speeds, rev   3
AXLES 
Front Axle Make    LiuGong Weld axle
Rear Axle Make    Meritor
Differential Type   NO-SPIN limited slip standard
Final Drive Type   chain drive
Axle Oscillation   ±15°
Front Axle Type   all welded steel frame
Front Axle, Wheel Lean Angle   ±17°
STEERING
Steering Configuration   load sensor steering gear
Steering Relief Pressure (Mpa) 17
Minimum Turning Radius (inches) 7800(307)
Steering Angle   ±45°
Frame Articulation Angle   ±20°
BRAKES
Service Brake Type   (Dry )shoe
Service Brake Location   ear axle only
Service Brake Actuation   hydraumatic
TIRES
Tire Size   17.5-25 PR12/L3
HYDRAULIC SYSTEM
Main Pump Type   gear
Main Relief Pressure (Mpa) 18
Pilot Pump Flow  L(Gal)/min 126(33)
WORKING CAPACITIES
Maximum Draw Pull (kN) 81.6
Cutting Pressure  kg(Lb) 6800(14991)
TANDEM DRIVE PERFORMANCE
Height mm(inches) 600(24)
Width mm(inches) 210(8)
Thickness, inner wall / outer wall mm(inches) 20/20(0.8/(0.8)
Center Distance mm(inches) 1538(61)
Oscillating Angle   ±15°
MOLDBOARD PERFORMANCE
Bank Cut Angle   40~70
Moldboard Lift Above Ground mm(inches) 450(18)
Moldboard Side Shift, right / left mm(inches) 725/675(29/27)
Maximum Sloping Angle   90°
Cutting Depth mm(inches) 555(22)
Circle Rotation   360°
Circle Diameter mm(inches) 1455(57)
Circle Thickness mm(inches) 135(5)
DIMENSIONS
Wheelbase mm(inches) 6230(245)
Overall Length mm(inches) 8790(346)
Overall Height with Cab   3438(135)
Overall Width mm(inches) 2600(102)
Clearance under Front Axle mm(inches) 645(25)
Moldboard Standard Length mm(inches) 3960(156)
Moldboard Standard Thickness mm(inches) 19(0.7)
Moldboard Standard Height mm(inches) 610(24)
OPERATING WEIGHTS
Operating Weight  kg(Lb) 13900(30644)
On Front Wheels kg(Lb) 3960(8730)
On Rear Wheels  kg(Lb) 9940(21914)
SERVICE CAPACITIES
Fuel Tank  L(Gal) 230(61)
Engine Oil  L(Gal) 22(6)
Cooling System  L(Gal) 40(11)
Hydraulic Reservoir  L(Gal) 186(49)
Transmission And Torque Converter  L(Gal) 45(12)
Tandems, Each L(Gal) 28(7)